Thermo Scientific Water Jacketed CO2 Incubator
This Thermo Scientific Water Jacketed CO2 Incubator provides superior protection against temperature loss in the event of an unexpected power outage. It surrounds your cultures in a unique insulated triple wall cabinet construction and jacket of temperature conditioned water, providing unsurpassed protection against unwanted heat loss - even should a power outage occur.
The polished stainless steel interior with 100% coved corners is easy to clean. Sturdy stainless steel shelves and supports can be easily removed without tools for cleaning, autoclaving or adjustment. The patented inner door gasket is also removable and cleanable, and adjusts continually to ensure a tight seal. The dual-pane, inner-glass door is heated to minimize condensation and help with temperature recovery.
Incubator includes remote alarm contacts that allow user to connect incubator to in-house alarm system and a stacking kit for dual stack configuration. Choice of thermocouple or IR sensor based CO2 control.
The standard model does not come with a HEPA filter, but a HEPA filter airflow system is available at extra charge as a factory installed option.
Key Features
- Triple-wall construction retains temperature
- Large 6.5 cu ft corrosion resistant stainless steel chamber
| Specifications for Thermo Scientific Forma® Water Jacketed CO2 Incubator | |
|---|---|
| Temperature | |
| Temperature Range: | 5°C above ambient to 55°C |
| Temperature Control: | ±0.1°C |
| Temperature Uniformity: | ±0.2°C at 37°C |
| CO2 | |
| CO2 Control: | Better than ±0.1% |
| CO2 Range: | 0 to 20% |
| Inlet Pressure Requirements: | 15 PSIG (1.0 bar) |
| Humidity | |
| Humidity: | Ambient to 95% at 37°C |
| Humidity Source: | 3 L standard, pan |
| Fittings | |
| Fill Port: | 3/8” hose (barbed) |
| Drain Port: | ¼” hose (barbed) |
| Access Port: | 1 3/10” with removable silicone plug with filter |
| CO2 Inlet: | ¼” hose (barbed) |
| Dimensions | |
| Exterior (WxHxD): | 26 x 39 1/2 x 25” |
| Interior (WxHxD): | 21 1/3 x 26 4/5 x 20” |
| Power: | 120V, 60Hz |
| Shipping Weight: | 324 lb (147 kg) |
| Item | CO2 Sensor Configuration | Accessory Description | Unit of Measure | Price | Purchase | |
|---|---|---|---|---|---|---|
|
REV3020
3020
|
IR Sensor | Each |
$12,857.14
|
|||
|
REV3010
3010
|
Thermocouple | Each |
$10,800.00
|
|||
|
1112049
190647
|
Roller Base | Each |
$883.54
|
|||
|
IEC1900067
1900067
|
Replacement HEPA & Inline Filter Kit | Each |
$158.94
|
|||
|
IEC965010
965010
|
Two Stage CO2 Regulator | Each |
$670.63
|
|||
|
1112051
190884
|
Stnls Steel Shelf Kit; w channels; shelf | Each |
$264.34
|
|||
|
REV1902000
1902000
|
Factory Installed HEPA Airflow System | Each |
$1,152.00
|
|||
|
1112050
237016
|
Stnls Steel Humidty Pan (small) | Each |
$181.03
|
|||
|
IEC3050
3050
|
External Gas Guard; 120V | Each |
$1,614.86
|