Labconco FlaskScrubber Glassware Washers

The Labconco FlaskScrubber Glassware Washers are designed to wash and dry a wide variety of narrow-neck and general purpose labware. Utilizing a brilliant 5” touch screen display featuring CleanWorks OS, users have full control of wash parameters and washer settings. The included lower spindle rack consists of 36 spindles, and 18 glassware holders for narrow-neck glassware such as volumetric and Erlenmeyer flasks. Able to reach a maximum wash temperature of 93°C (199°F), water and detergent are pumped through the spindles to reach the innermost areas of glassware. Specialized inserts for pipettes, graduated cylinders, small vials, culture tubes, and small utensils makes the FlaskScrubber an extremely versatile glassware washer.

Forced air drying through the spindles and chamber ensures thorough drying inside and out. FlaskScrubber Glassware Washers can be configured to include robust single- and three-phase heating. User can increase capacity by adding an optional Upper Spindle or Standard Rack. A Lower Standard Rack may be used instead of the Lower Spindle Rack to provide even more versatility.

Click here for a list of available accessories for Labconco FlaskScrubber Glassware Washers

Key Features

• Water temperature up to 93°C (199°F)
• Steam generator that produces hot vapor to help remove stubborn labware contaminants
• Pump rated at 96 gal/min (363 L/min) when operated at 115V, 60Hz and 208/23V, 50Hz and 112 gal/min (424 L/min) on 208/230V, 60Hz
• Synchronous drain pump rated at up to 4.2 gal/min (16 L/min)
• Purified water pump to bring non-pressurized purified water into the tank for up to eight pure water rinses
• Forced air drying into the tank and through spindles programmable up to 240 minutes and from 25-80°C (77-176°F)
• Electronic door latch with SpeedVent Technology to facilitate faster drying
• Detergent dispenser for powder or liquid detergent
• Level-sensing 6mL rinse aid solution dispenser
• Operation at or below 62 decibels
• Full color touch screen display with CleanWorks OS providing full user control
• 9 factory-set programs: RINSE ONLY, PLASTIC, GLASS, GLASS PLUS, LIFE SCEINTIFIC, ANALYTICAL, DRY ONLY, ECO WASH, CLEAN WATER. Plus up to 200 user-defined programs
• Clear and specific alarm displays
• Calibrate setpoints such as: temperature, fill volume, detergent dispensing
• Self-diagnostics to aid in servicing and troubleshooting
• Password protection to secure washer from unauthorized changes
• User configurable delayed start (up to 12 hours)
• USB data output
• US Standard 61010-1 (all models)
• CAN/CSA C22.2 No. 61010-1 (all models)
• CE Conformity marking (230V, 50/60Hz models)
• Suitable with ADA-height casework (all models)