Labconco Echo 4' Floor-Mounted Filtered Fume Hoods

Labconco Echo 4' Floor-Mounted Filtered Fume Hoods provide the interior height needed for bulky apparatus with no ducting required. These hoods feature fully-closing, vertical-rising sashes. eGuard® communication software offers real-time monitoring on the user’s phone or computer. From a remote location, data such as usage authorization, filter saturation detection, sash position, and temperature man be observed and managed.

The Echo uses Neutrodine® Unisorb Filters, the most comprehensive, safety-driven carbon filter available. This single molecular filter type can easily absorb most chemicals and mixtures, taking the guesswork out of filter selection. Erlab-proven Neutrodine Filters are the heart of GFH Filtration Technology.

Floor-Mounted models include a fiberglass panelized linjer and three exterior depths: 37.7”, 43.7”, and 55.7”. Models are available for carbon-only, carbon with acid sensor, carbon for formaldehyde sensor, or HEPA-only filtration. Filters are sold separately.

Floor-mounted hoods are shipped partially unassembled and require some field assembly (not provided). They are shipped on 2-3 pallets, requiring placement of lower and upper portions, installation of corner posts, baffles, header, and sashes, and connection of piping and electrical (if included).

Required accessories (not included): Neutrodine® Unisorb Filters (except HEPA only models which require HEPA filters). Number of filters required is determined by the width of the hood.

Click here for a list of accessories for Labconco Echo 4' Floor-Mounted Filtered Fume Hoods.

Key Features

• Eco-Foil™ air foil with aerodynamic Clean-Sweep™ airflow openings
• Cord-Keeper™ Slots on left and right side of air foil
• Single piece, tempered safety glass vertical-rising sashes with sable pulley, sash weigh and power-coated aluminum sash handle and tracks with Clean-Sweep™ airflow openings. Upper sash stop at 16” sash open height. Upper sash open to 26” high for loading chemicals. Lower sash opens up from floor to 55.2” for transporting carts, drums, and apparatus
• Removeable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
• eGuard2 software communication
• Smart control module with wifi, Bluetooth, and ethernet connectivity
• Factory-installed command module, fan button, and light button
• Rear baffle
• By-pass airflow design
• Glacier white powder-coated steel exterior
• Chemical-resistant, fiberglass-reinforced, composite panel liner
• 2 Pre-wired vapor-proof LED lights for up to 63 foot candles rated for 50,000 hours
• Factory-prepared for up to two electrical duplex receptacles and six service fixtures
• 2 Roughing prefilters
• 2 Built-in exhaust fans to maintain 60 fpm face velocity with only an upper sash opening height of 16”
• Sound pressure of <60 dB(A) with sash at operating height and <48 dB(A) with sash closed
• Sensor package for primary filter breakthrough of solvent and acid fumes, laboratory air quality, sash position, and temperature
• Audible/visual alarms for breakthrough detection, temperature ≥40°C (104°F), fan failure and high sash position opening. At ≥60°C (140°F), all fans stop
• Power cord with plug

Fixtured Models May Feature

• Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided.
• One-prewired GFCI electrical duplex receptacle on lower right side

Options Available Include

• HEPA Filter
• Region-specific electrical plug configurations
• Service fixtures

Compliance

• SEFA 9, DHIII
• SEFA 8, Cabinet Surface Finish Tests
• Modified ASHRAE 110
• ANSI Z9.5-2011
• AFNOR NF-X 15-211
• ASTM E84-09C
• UL Standard 61010-1
• CAN/CSA C22.2 No. 61010-1