Pyrex Heavy-Wall Glass Filtering Flasks
The PYREX® Heavy-Wall Glass Filtering Flasks, with tubulation, are blown in special molds designed to give maximum mechanical strength. For convenience, theflasks are graduated to show approximate capacity. The neck finishaffords an excellent fit for rubber stoppers. The vacuum hose is attached to the flask's sidearm. A funnel is insertedinto the neck of the flask through a ground joint or rubber stopper.The applied vacuum facilitates the filtration process.
The 5360-125 (EF8840C) flask is a small (125mL) filtering flask recommended for microchemical use.
Key Features
- Sidearm tabulations are blown into special molds for maximum strength
- Micro filtering flasks are recommended for microchemical use
- All flasks have permanent white enamel marking spots
Item | Volume | Stopper Size | Tubulation OD- mm | Unit of Measure | Price | Purchase |
---|---|---|---|---|---|---|
CGW5340-500
5340-500
|
500mL | 7 | 10 | Each |
Call to order
|
|
CGW5340-1L
5340-1L
|
1000mL | 8 | 10 | Case of 12 |
Call to order
|
|
CGW5340-250
5340-250
|
250mL | 6 | 10 | Pack of 6 |
Call to order
|
|
CGW5360-125
5360-125
|
125mL | 5 | 10 | Each |
Call to order
|
|
CGW5340-2L
5340-2L
|
2000mL | 9 | 12.5 | Case of 12 |
Call to order
|
|
CGW5340-4L
5340-4L
|
4000mL | 12 | 12.5 | Case of 6 |
Call to order
|