Yamato DP83C/103C Series Vacuum Oven
Large scale vacuum drying oven designed for treatment of large-sized parts
Performance and functions
- Vacuum pump can be installed inside the oven
- Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance
- Because the exhaust system is improved to significantly shorten the time to reach vacuum, working efficiency is improved
- Use specialized function menu key and ▲▼ key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc.
Safety features
- Self-diagnostic functions (abnormal temperature sensor, heater disconnection, auto overheat prevention, SSR short circuit), overheat protector, ELB to prevent overcurrent, key lock, etc.
- For safety, resin protection panel is installed at the observation window
| Model | DP83C | DP103C |
|---|---|---|
| Method | Decompression • chamber wall heating | |
| Operating temp. range | 40~200°C | |
| Operating vacuum range | 101~0.1kPa (760~1Torr) | |
| Temp. adjustment accuracy | ±1.0°C (at 200°C) | |
| Interior | Stainless steel plate | |
| Exterior | Cold rolled steel plate with chemical proofing coating | |
| Insulating material | Glass fiber | |
| Heating method | Decompressed chamber wall direct heating | |
| Heater power | 6.5kW | 14.4kW |
| Observation window | Toughened glass + resin protection panel | |
| Vacuum gauge | Pointer type, -100~0kPa | |
| Vacuum pump installation room | Yes | |
| Temp. control | 3 segments PID | |
| Temp. setting | Use specialized function menu key and up/down key to set | |
| Temp. display | Measured temp. display: green 4-digit LED digital display Setting temp. display: red 4-digit LED digital display |
|
| Timer | 1min-99 hr 59 min and 100 hr-999 hr 50 min (attached with timing wait function) | |
| Operation function | Fixed temp. auto start, auto stop, program operation | |
| Program mode | Program operation 3 segments 30 steps (30 steps×1, 15 steps×2, 10 steps×3) | |
| Additional function | Deviation correction, key lock, power outage compensation | |
| Heater circuit control | SSR driving | |
| Sensor | K thermocouple (temp. controller and overheat protector) | |
| Safety device |
Self-diagnosis circuit (abnormal temp. sensing, heater disconnection, auto overheat prevention,
SSR short circuit),overheat protector, EBL to prevent overcurrent, key lock, etc.
|
|
| Internal dimensions W×D×H | 800×800×800 mm | 1000×1000×1000 mm |
| External dimensions W×D×H | 1020×1020×1850 mm | 1300×1280×2110 mm |
| Internal capacity | 512L | 1000L |
| Air exhaust port | NW40 flange | |
| Air suction port | Rc 3/8 | |
| Power source (50/60Hz) rated current |
AC220V 31.5A
(no plug, round terminal)
|
3 phase AC380V 27A
(no plug, round terminal)
|
| Weight | ~450kg | ~1000kg |
| Accessories | Stainless steel punching plates, 2 pcs. | Stainless steel punching plates, 4 pcs. |
| Optional |
Shelf plate, vacuum pump, N2 introduction device, recorder, alarm indicator lamp
(stand-by/running/malfunction), external communication (RS485), temp.
output terminal (4~20mA), Output terminal for external alarm, time up output terminal |
|
| Item | Capacity | Unit of Measure | Price | Purchase | |
|---|---|---|---|---|---|
|
YAMDP-83C
DP-83C
|
512L | Each |
$28,035.95
|