Pall Glass Fiber Membrane Filters

From $59.95

Pall Life Sciences Glass Fiber Membrane Filters Type A/E Membrane Filters meet the requirements for suspended solids testing, as described in Standard Methods for the Examination of Water and Wastewater, current edition. They are made for testing dissolved and suspended solids in wastewater and gravimetric analysis of air pollutants, and have high flow rates, wet strength, and dirt (solids) holding capacities. They reduce filtration costs and premature clogging when filtering difficult-to-filter or highly contaminated solutions.

Key Features

  • High flow rates and wet strength
  • Binder-free borosilicate glass
Specifications for Gelman Membrane Filters - A/E Glass Fiber Filters
Description: Type A/E
Typical Applications: Water solids testing, air
monitoring, gravimetric analysis: Diagnostic applications,
sample prefiltration: Cell harvesting, prefiltration, solids testing
Filter Media: Borosilicate glass without binder
Pore Size (Nominal): 1 μm
Typical Thickness: 330 μm (13 mils)
Typical Water Flow Rate:
mL/min/cm2 at 0.3 bar (30 kPa, 5 psi)
Typical Air Flow Rate:
L/min/cm2 at 0.7 bar (70 kPa, 10 psi)
Maximum Operating Temperature: Air - 550 °C (1,022 °F)
Sterilization: Autoclavable
Typical Aerosol Retention: 99.98%
Average Rating:
Rate this product:
Cat # Pore Diameter Units Of Measure Availability Price Quantity
1.0µm 25mm
  • $163.95
1.0µm 47mm
  • $59.95
1.0µm 102mm
  • $131.95
1.0µm 8 x 10 in
  • $314.95
Type your desired quantities in the fields above, then click: