The Daigger Automated Microplate Reader features on-board data reduction capabilities that surpass most PC software packages. Simple to use and program, the “soft keys” and a 2 x 24 LCD let you program extensive curve fitting; auto or manual plate layout; control and assay validation; transformation and formula application; and cut-off and call criteria. Store 5 standard curves and up to 75 assays into memory that can be recalled instantly, and save up to 10 microplate test results.
As a stand-alone microplate reader, it is designed to read 24-, 48-, or 96-well microplates for clinical, biotechnology research, food processing, environmental, or agricultural applications.
On-board diagnostic testing allows the microplate reader to determine its own performance and optical specifications and provide results using an optical “self-test” that checks the entire electrical and optical signal pathway; a calibration test plate (order separately below) that determines alignment, accuracy, repeatability, and linearity; or the “wet test” that may be used for performance testing. CE-marked, ETL-listed, conforms to UL 3101-1 and IEC 1010-1, CSA-certified.
Integrated data analysis – no additional PC package required
Specifications for Daigger® Automated Microplate Reader
30 seconds for 96-well plates
400 to 750 nm
Five-cavity wheel (supplied): 405, 450, 490, and 630 nm
0.000 to 3.000 Abs
+/-1%; +/-0.010 Abs from 0 to 2.000 Abs @405 nm
+/-1% from 0 to 2.000 Abs @405 nm; +/-3% from 2.000 to 3.000 Abs @450 nm
+/-0.5%; +/-0.005 Abs from 0 to 2.000 Abs @405 nm
RS-232 bidirectional serial interface Parallel Centronics printer interface