The EF5069A kit has been designed to address the question of correct and rapid measurement of pH directly in the soil. Every item in this kit has been made to facilitate measurements in the field without compromising accuracy.

The EF5069A can test pH of soil directly or after preparation of a diluted sample. In order to measure the pH directly, the kit includes a plastic auger is included to perforate the ground. The pH and temperature can be directly tested with the 3-in-1 conic shaped electrode with even a slightly moist soil. For higher degrees of accuracy, or for stony ground where the electrode may be damaged, use the specially made soil preparation solution. This solution is included in the package to help you measure pH more precisely by diluting a sample of the soil into the solution. The kit includes a pH meter, soil electrode, pH 4 and pH 7 calibration sachets, beaker, auger, and a practical and rugged carrying case. The meter is waterproof and engineered for simplicity.

The 3-in-1 electrode has been designed for direct soil measurement. The conic rugged tip and can be directly inserted in moist or soft soil. The electrode incorporates a temperature sensor right near the tip to enable it to measure and compensate for the temperature quickly. It also houses a miniature amplifier to provide greater stability in spot measurements. The dual-level LCD displays pH from –2 to 16, with 0.01 resolutions, and temperature Menu-driven custom microprocessor, from –5 to 105°C prompts during operation and calibration.